Selling fast!
Get yours while you can.
Your cart is empty :(
Continue shopping
4X Journal
Vol.4
OUT NOW!
Your cart
Estimated total:
$0.00 NZD
DM-134MG
Couldn't load pickup availability
If this Kit is showing as "Pre-Order" please complete the product enquiry form on this page to confirm which items are out of stock. Sometimes, there is only one item that is out of stock which may be able to be substituted to complete the kit.
Disclaimer: This product requires an LVV Certification to meet the current legal requirements for use on NZ public roads.
A wheel alignment must be performed after the installation of upgraded suspension parts. After a suspension lift, most ADAS (Advanced Driver Assistance Systems) equipped vehicles will require calibration.
It is the purchaser's responsibility to ensure the ADAS re-calibration is carried out by a specialised technician to guarantee the safety of the vehicle and its occupants.
Disclaimer: This product requires an LVV Certification to meet the current legal requirements for use on NZ public roads.
Profender Pre-Assembled Front Lift for Isuzu MU-X 2013-2021
- A 85mm+ Lift is achievable with extra components. A 85mm+ Lift will most likely NOT pass a NZ certification as this will decrease the suspension droop travel, it is up to the customer to set these any higher than a 75mm Lift.
- You must use a ball joint spacer or UCA with this front lift kit to achieve more than 45mm of Lift - Please See Ball Joint Spacers HERE
Looking for a quick and easy lift for your MU-X? We have the answer!
Simply unbolt your factory struts and replace with these direct bolt-in front pre-assembled shocks.
Please use the drop down menu to select your lift amount and the correct spring rates depending on your vehicles accessories.
Type: MU-X
Model: UCS85
Year: 2013 - Mid 2021
Suspension Type: Coil Spring Front / Coil Spring Rear
Front Lift: 20mm - 75mm Lift
Detail:
- Monotube Internal Reservoir Shock Absorbers
- These front struts are pre-assembled in our workshop and ready to go.
2x Profender Coilover Shocks - MG-9610A50
1x Pair Dobinsons Front Coil Springs
2x Trundles Strut Top Mounts - TOP10
| Make | Model | Years |
|---|---|---|
| ISUZU | MU-X 1st Gen (UCS85) | 2013–2021 |
We're happy to help.

Selling fast!
Get yours while you can.
Trundles and this website are not affiliated with, endorsed by, or associated with Toyota. All trademarks, service marks, and logos used on this website are the property of their respective owners. The mention of Toyota on this website is solely for informational purposes and does not imply any partnership, sponsorship, or affiliation.
Profender Pre-Assembled Front Lift for Isuzu MU-X 2013-2021
- A 85mm+ Lift is achievable with extra components. A 85mm+ Lift will most likely NOT pass a NZ certification as this will decrease the suspension droop travel, it is up to the customer to set these any higher than a 75mm Lift.
- You must use a ball joint spacer or UCA with this front lift kit to achieve more than 45mm of Lift - Please See Ball Joint Spacers HERE
Looking for a quick and easy lift for your MU-X? We have the answer!
Simply unbolt your factory struts and replace with these direct bolt-in front pre-assembled shocks.
Please use the drop down menu to select your lift amount and the correct spring rates depending on your vehicles accessories.
Type: MU-X
Model: UCS85
Year: 2013 - Mid 2021
Suspension Type: Coil Spring Front / Coil Spring Rear
Front Lift: 20mm - 75mm Lift
Detail:
- Monotube Internal Reservoir Shock Absorbers
- These front struts are pre-assembled in our workshop and ready to go.
2x Profender Coilover Shocks - MG-9610A50
1x Pair Dobinsons Front Coil Springs
2x Trundles Strut Top Mounts - TOP10