Selling fast!
Get yours while you can.
Your cart is empty :(
Continue shopping
4xJournal Vol.5
OUT NOW!
Your cart
Estimated total:
$0.00 NZD
48817-30010K
Couldn't load pickup availability
Disclaimer: It is the purchaser’s responsibility to ensure all products and the installation thereof meet current LVV requirements, where applicable.
Terrain Tamer Sway Bar Link Rod Kit to suit Toyota Landcruiser Vehicles
Please note: This kit uses an 8mm diameter center bolt thread. It is designed specifically for early Toyota Land Cruiser 60 and 70 Series models up to 12/1989. Later models often upgraded to a 10mm bolt; please verify your existing bolt diameter before ordering. This is a complete axle kit (SET OF 2) which includes all components required to rebuild both the left and right front stabilizer links. Do not over-tighten the mounting nuts; the bushes should be compressed only until they match the diameter of the metal cup washers to prevent premature splitting.
Includes:
2x Stabilizer Link Rods (8mm Thread)
8x Rubber Link Cushions (Bushes)
8x Zinc-Plated Cup Washers
2x Locking Nuts
2x Spacer Sleeves
Details:
- Complete kit for both left and right front stabilizer links
- Specifically suits Land Cruiser 60 and 70 Series (up to 12/1989)
- High-tensile 8mm center bolts for maximum reliability
- Direct replacement for individual components under OEM 48817-30010
Technical Specifications:
- Part Number: 48817-30010K
- Bolt Thread: 8mm
- Bush Material: High-Density Rubber
- Application: Front Stabilizer Bar Link
- Configuration: Complete Axle Set (Set of 2)
| Make | Model | Years |
|---|---|---|
| TOYOTA | Landcruiser 79 Series Dual Cab Facelift | 2023–Onwards |
| TOYOTA | Landcruiser 79 Series Single Cab Facelift | 2023–Onwards |
| TOYOTA | Landcruiser 79 Series Dual Cab DPF | 2016–2022 |
| TOYOTA | Landcruiser 79 Series Single Cab DPF | 2016–2022 |
| TOYOTA | Landcruiser 79 Series Dual Cab Pre-DPF | 2009–2016 |
| TOYOTA | Landcruiser 79 Series Single Cab Pre-DPF | 1999–2016 |
| TOYOTA | Landcruiser 70 Series (FZJ / HZJ 71/4/6) | 1999–2004 |
| TOYOTA | Landcruiser 70 Series (HZJ / PZJ 70/73) | 1990–1999 |
| TOYOTA | Landcruiser 75 Series (FZJ / HZJ75) | 1990–1999 |
| TOYOTA | Landcruiser 80 Series | 1990–1998 |
| TOYOTA | Prado 70 Series | 1987–1996 |
| TOYOTA | Landcruiser 60 Series (FJ / HJ 60/61) | 1980–1990 |
| TOYOTA | Landcruiser 75 Series (FJ / HJ / BJ75) | 1984–1990 |
| TOYOTA | Landcruiser 70 Series (FJ / BJ 70/1/3/4) | 1985–1989 |
| TOYOTA | Landcruiser 70 Series Bundera (LJ / RJ 70/73) | 1984–1989 |
| TOYOTA | Landcruiser 45 Series Facelift | 1980–1985 |
| TOYOTA | Landcruiser 40 Series | 1960–1984 |
| TOYOTA | Landcruiser 55 Series | 1970–1980 |
We're happy to help.

Selling fast!
Get yours while you can.
Trundles and this website are not affiliated with, endorsed by, or associated with Toyota. All trademarks, service marks, and logos used on this website are the property of their respective owners. The mention of Toyota on this website is solely for informational purposes and does not imply any partnership, sponsorship, or affiliation.
Terrain Tamer Sway Bar Link Rod Kit to suit Toyota Landcruiser Vehicles
Please note: This kit uses an 8mm diameter center bolt thread. It is designed specifically for early Toyota Land Cruiser 60 and 70 Series models up to 12/1989. Later models often upgraded to a 10mm bolt; please verify your existing bolt diameter before ordering. This is a complete axle kit (SET OF 2) which includes all components required to rebuild both the left and right front stabilizer links. Do not over-tighten the mounting nuts; the bushes should be compressed only until they match the diameter of the metal cup washers to prevent premature splitting.
Includes:
2x Stabilizer Link Rods (8mm Thread)
8x Rubber Link Cushions (Bushes)
8x Zinc-Plated Cup Washers
2x Locking Nuts
2x Spacer Sleeves
Details:
- Complete kit for both left and right front stabilizer links
- Specifically suits Land Cruiser 60 and 70 Series (up to 12/1989)
- High-tensile 8mm center bolts for maximum reliability
- Direct replacement for individual components under OEM 48817-30010
Technical Specifications:
- Part Number: 48817-30010K
- Bolt Thread: 8mm
- Bush Material: High-Density Rubber
- Application: Front Stabilizer Bar Link
- Configuration: Complete Axle Set (Set of 2)