Selling fast!
Get yours while you can.
MG-6607A50-PAIR-PRA90
Couldn't load pickup availability
Disclaimer: This product requires an LVV Certification to meet the current legal requirements for use on NZ public roads. A wheel alignment must be performed after the installation of upgraded suspension parts. It is the purchaser’s responsibility to ensure all products and the installation thereof meet current LVV requirements, where applicable.
Disclaimer: This product requires an LVV Certification to meet the current legal requirements for use on NZ public roads.
Profender Monotube Adjustable Front Coilovers (Pair) to suit Toyota Landcruiser Prado 90 Series 1996-2003
Includes:
2x Monotube Adjustable Shock Absorbers - MG-6607A50
Details:
- These shocks are suitable for 50-100mm Lift. They will come pre-set at approximately 75mm - any fine adjustments can be done by customer after test fitting
- These shocks are fully rebuildable and can be re-valved
- Fine adjustments can still be made by filling up or releasing Nitrogen in the shock body instead of the reservoir
- 1 Year Manufacturer Warranty
Measurements:
- Min. Pressure 80 PSI
- Max. Pressure 200 PSI
- Pressure Set From Factory 150 PSI
- 46mm Piston with Teflon
- 20mm Super Polished Shaft
- 53mm Outer Body
Please note as these are a Height Adjustable Coilover Strut, they require LVVTA Certification.
| Make | Model | Years |
|---|---|---|
| TOYOTA | Prado 90 / 95 Series | 1996–2003 |
We're happy to help.

Selling fast!
Get yours while you can.
Trundles and this website are not affiliated with, endorsed by, or associated with Toyota. All trademarks, service marks, and logos used on this website are the property of their respective owners. The mention of Toyota on this website is solely for informational purposes and does not imply any partnership, sponsorship, or affiliation.
Profender Monotube Adjustable Front Coilovers (Pair) to suit Toyota Landcruiser Prado 90 Series 1996-2003
Includes:
2x Monotube Adjustable Shock Absorbers - MG-6607A50
Details:
- These shocks are suitable for 50-100mm Lift. They will come pre-set at approximately 75mm - any fine adjustments can be done by customer after test fitting
- These shocks are fully rebuildable and can be re-valved
- Fine adjustments can still be made by filling up or releasing Nitrogen in the shock body instead of the reservoir
- 1 Year Manufacturer Warranty
Measurements:
- Min. Pressure 80 PSI
- Max. Pressure 200 PSI
- Pressure Set From Factory 150 PSI
- 46mm Piston with Teflon
- 20mm Super Polished Shaft
- 53mm Outer Body
Please note as these are a Height Adjustable Coilover Strut, they require LVVTA Certification.