Selling fast!
Get yours while you can.
Your cart is empty :(
Continue shopping
4X Journal
Vol.4
OUT NOW!
Your cart
Estimated total:
$0.00 NZD
NP300L75IMS-1
Couldn't load pickup availability
If this Kit is showing as "Pre-Order" please complete the product enquiry form on this page to confirm which items are out of stock. Sometimes, there is only one item that is out of stock which may be able to be substituted to complete the kit.
Disclaimer: This product requires an LVV Certification to meet the current legal requirements for use on NZ public roads.
A wheel alignment must be performed after the installation of upgraded suspension parts. After a suspension lift, most ADAS (Advanced Driver Assistance Systems) equipped vehicles will require calibration.
It is the purchaser's responsibility to ensure the ADAS re-calibration is carried out by a specialised technician to guarantee the safety of the vehicle and its occupants.
Disclaimer: This product requires an LVV Certification to meet the current legal requirements for use on NZ public roads.
Dobinsons 75mm IMS Lift Kit to suit Nissan Navara D23 NP300 2014-Onwards (Leaf Rear)
Note:
- A 100mm Lift is achievable with extra components. A 100mm Lift will most likely NOT pass a NZ certification as this will decrease the suspension droop travel, it is up to the customer to set these any higher than a 75mm Lift.
-The NP300 sits nose down from factory, therefore if you are chasing an even look we recommend only raising the front 40mm.
- Series 5 May Require Notching Of The Lower Trailing Arm to Allow MRR To Fit
- Suits Leaf Rear Models Only
Please use the drop down menu to select your radius arm options and the correct spring rates depending on your vehicles accessories.
Type: Navara
Model: D23 NP300
Year: 2014 -
Suspension Type: Coil Spring Front / Leaf Spring Rear
Front Lift: 75mm Lift
Rear Lift: 40-75mm Lift
Detail:
- 4x4 Single Cab / Dual Cab / Extra Cab Models
- Monotube Internal Reservoir Shock Absorbers
- Front shocks come pre-assembled for ease of installation.
Front
2x Dobinsons IMS Front Shocks - IMS45-50642
1x Pair Dobinsons Front Springs
2x Top Hats - TOP7
1x Pair Trundles Upper Control Arms - UCA4981NV2
2x Trundles Extended Front Sway Bar Links - NAV-033LH & NAV-033RH
Rear
2x Dobinsons IMS Rear Shocks - IMS43-50081B
1x Pair Dobinsons Rear Leaf Springs
1x Dobinsons Leaf Bush Kit - PB45-1108K
2x Dobinsons U-Bolt Kits - UB59-453-3K
1x Trundles Adjustable Headlight Bracket - NAV-026
1x Set Trundles Rear Brake Hoses - EBH-NP300-R-R
75-100mm (3-4") Lifts with 420-425mm Extended Length shocks will give up to 620mm Hub-To-Guard height but WILL require clearancing of the strut tower.
These lifts will result in a higher CV angle and may require more alignment correction components and the potential of reduced ride comfort.
| Make | Model | Years |
|---|---|---|
| NISSAN | Navara D23 NP300 (Leaf REAR) | 2014–Onwards |
We're happy to help.

Selling fast!
Get yours while you can.
Trundles and this website are not affiliated with, endorsed by, or associated with Toyota. All trademarks, service marks, and logos used on this website are the property of their respective owners. The mention of Toyota on this website is solely for informational purposes and does not imply any partnership, sponsorship, or affiliation.
Dobinsons 75mm IMS Lift Kit to suit Nissan Navara D23 NP300 2014-Onwards (Leaf Rear)
Note:
- A 100mm Lift is achievable with extra components. A 100mm Lift will most likely NOT pass a NZ certification as this will decrease the suspension droop travel, it is up to the customer to set these any higher than a 75mm Lift.
-The NP300 sits nose down from factory, therefore if you are chasing an even look we recommend only raising the front 40mm.
- Series 5 May Require Notching Of The Lower Trailing Arm to Allow MRR To Fit
- Suits Leaf Rear Models Only
Please use the drop down menu to select your radius arm options and the correct spring rates depending on your vehicles accessories.
Type: Navara
Model: D23 NP300
Year: 2014 -
Suspension Type: Coil Spring Front / Leaf Spring Rear
Front Lift: 75mm Lift
Rear Lift: 40-75mm Lift
Detail:
- 4x4 Single Cab / Dual Cab / Extra Cab Models
- Monotube Internal Reservoir Shock Absorbers
- Front shocks come pre-assembled for ease of installation.
Front
2x Dobinsons IMS Front Shocks - IMS45-50642
1x Pair Dobinsons Front Springs
2x Top Hats - TOP7
1x Pair Trundles Upper Control Arms - UCA4981NV2
2x Trundles Extended Front Sway Bar Links - NAV-033LH & NAV-033RH
Rear
2x Dobinsons IMS Rear Shocks - IMS43-50081B
1x Pair Dobinsons Rear Leaf Springs
1x Dobinsons Leaf Bush Kit - PB45-1108K
2x Dobinsons U-Bolt Kits - UB59-453-3K
1x Trundles Adjustable Headlight Bracket - NAV-026
1x Set Trundles Rear Brake Hoses - EBH-NP300-R-R
75-100mm (3-4") Lifts with 420-425mm Extended Length shocks will give up to 620mm Hub-To-Guard height but WILL require clearancing of the strut tower.
These lifts will result in a higher CV angle and may require more alignment correction components and the potential of reduced ride comfort.