Dobinsons 75mm IMS Lift Kit to suit Nissan Navara D23 NP300 (Coil Rear) 2015-Onwards
- Price
- $3,270
Note: If this Kit is showing as "Pre-Order" please contact us to confirm which items are out of stock. Sometimes, there is only one item that is out of stock which may be able to be substituted to complete the kit. Contact us here.
- DETAILS
- COMPONENTS
Dobinsons 75mm IMS Lift Kit to suit Nissan Navara D23 NP300 (Coil Rear) 2015-Onwards
Note:
- A maximum of a 75mm lift setting will be used when pre-assembling
- A 100mm Lift is achievable with extra components. A 100mm Lift will most likely NOT pass a NZ certification as this will decrease the suspension droop travel, it is up to the customer to set these any higher than a 75mm Lift.
-The NP300 sits nose down from factory, therefore if you are chasing an even look we recommend only raising the front 40mm.
- Series 5 May Require Notching Of The Lower Trailing Arm to Allow MRR To Fit
Please use the drop down menu to select your radius arm options and the correct spring rates depending on your vehicles accessories.
Type: Navara
Model: D23 NP300
Year: 2015 -
Suspension Type: Coil Spring Front / Coil Spring Rear
Front Lift: 75mm Lift
Rear Lift: 40-75mm Lift
Detail:
- Series 5 Long Wheelbase Models Only
- 4x4 Single Cab / Dual Cab / Extra Cab Models
- Monotube Internal Reservoir Shock Absorbers
- Front shocks come pre-assembled for ease of installation.
KIT CONTAINS:
Front
2x Dobinsons IMS Front Shocks
1x Pair Dobinsons Front Springs
2x Trundles Strut Mounts - TOP7
1x Pair Trundles Upper Control Arms - UCA4981N
2x Trundles Extended Front Sway Bar Links - NAV-033LH & NAV-033RH
Rear (40mm Lift Options)
2x Dobinsons IMS Rear Shocks
1x Pair Dobinsons Rear Coil Springs
Rear (75mm Lift Options)
2x Dobinsons IMS Rear Shocks
1x Pair Dobinsons Rear Coil Springs
2x Trundles Rear Extended Sway Bar Links - NAV-031
1x Trundles Adjustable Panhard Rod - NAV-032
1x Trundles Adjustable Headlight Bracket - NAV-026
1x Set Trundles Rear Brake Hoses - EBH-NP300-R-R
Disclaimer: This product requires an LVV Certification to meet the current legal requirements for use on NZ public roads.
A wheel alignment must be performed after the installation of upgraded suspension parts. After a suspension lift, most ADAS (Advanced Driver Assistance Systems) equipped vehicles will require calibration.
It is the purchaser's responsibility to ensure the ADAS re-calibration is carried out by a specialised technician to guarantee the safety of the vehicle and its occupants.