Dobinsons 75mm MRA Lift Kit to suit Lexus GX460 2010-2019 (No KDSS)
Dobinsons 75mm MRA Lift Kit to suit Lexus GX460 2010-2019 (No KDSS)
Click image to open expanded view
Dobinsons 75mm MRA Lift Kit to suit Lexus GX460 2010-2019 (No KDSS)
Dobinsons 75mm MRA Lift Kit to suit Lexus GX460 2010-2019 (No KDSS)

Dobinsons 75mm MRA Lift Kit to suit Lexus GX460 2010-2019 (No KDSS)

Price
$4,300
Front Springs:No Load
Rear Springs:No Load (60mm Lift)
Add Diff Drop?:No
Usually Ships Within 24 Hours, Unless on Pre-Order

Note: If this Kit is showing as "Pre-Order" please contact us to confirm which items are out of stock. Sometimes, there is only one item that is out of stock which may be able to be substituted to complete the kit. Contact us here.

Dobinsons 75mm MRA Lift Kit to suit Lexus GX460 2010-2019 (No KDSS)

Suits Models WITHOUT KDSS Only.

NOTE:
- A maximum of a 75mm lift setting will be used when pre-assembling.
- A 100mm Lift is achievable with extra components. A 100mm Lift will most likely NOT pass a NZ certification as this will decrease the suspension droop travel, it is up to the customer to set these any higher than a 75mm Lift.

Please use the drop down menu to select the correct spring rates depending on your vehicles accessories.

Type: GX460
Model: - 
Year: 2010 - 2019
Suspension Type: Coil Spring Front / Coil Spring Rear
Front Lift: 75mm Lift
Rear Lift: 60mm - 75mm Lift
Detail:
- Non-KDSS Models
- Monotube Remote Reservoir Shock Absorbers
- Front shocks come pre-assembled for ease of installation.

KIT CONTAINS:

Front:
2x Dobinsons MRA Front Shocks - MRA59-A574
1x Pair Dobinsons Front Springs
2x Trundles Strut Top Mounts - TOP2
1x Pair Trundles Upper Control Arms - UCA3841F
1x Pair Dobinsons Adjustable Bump Stop - BS59-560

Rear:
2x Dobinsons MRA Rear Shocks - MRA59-A575
1x Pair Dobinsons Rear Springs

If you require a rebuild kit for MRA59-A574, please click here

For upper replacement bushes to fit MRA59-A575, please click here

If you require fitting instructions for the MRA59-A574 shock, please click here

If you require fitting instructions for the MRA59-A575 shock, please click here

Disclaimer: This product requires an LVV Certification to meet the current legal requirements for use on NZ public roads.

A wheel alignment must be performed after the installation of upgraded suspension parts. After a suspension lift, most ADAS (Advanced Driver Assistance Systems) equipped vehicles will require calibration.

It is the purchaser's responsibility to ensure the ADAS re-calibration is carried out by a specialised technician to guarantee the safety of the vehicle and its occupants.

Vehicle Fitment
SKU

You may also like