Dobinsons 75mm MRA Lift Kit to suit Nissan Navara D23 NP300 2014-Onwards (Leaf Rear)
- Price
- $5,100
Note: If this Kit is showing as "Pre-Order" please contact us to confirm which items are out of stock. Sometimes, there is only one item that is out of stock which may be able to be substituted to complete the kit. Contact us here.
- DETAILS
- COMPONENTS
- EXTRAS
Dobinsons 75mm MRA Lift Kit to suit Nissan Navara D23 NP300 2014-Onwards (Leaf Rear)
Note:
- A maximum of a 75mm lift setting will be used when pre-assembling
- A 100mm Lift is achievable with extra components. A 100mm Lift will most likely NOT pass a NZ certification as this will decrease the suspension droop travel, it is up to the customer to set these any higher than a 75mm Lift.
-The NP300 sits nose down from factory, therefore if you are chasing an even look we recommend only raising the front 40mm.
- Series 5 May Require Notching Of The Lower Trailing Arm to Allow MRR To Fit
- Suits Leaf Rear Models Only.
Please use the drop down menu to select your radius arm options and the correct spring rates depending on your vehicles accessories.
Type: Navara
Model: D23 NP300
Year: 2014 -
Suspension Type: Coil Spring Front / Leaf Spring Rear
Front Lift: 75mm Lift
Rear Lift: 45mm Lift
Detail:
- 4x4 Single Cab / Dual Cab / Extra Cab Models
- Monotube Remote Reservoir Shock Absorbers
- Front shocks come pre-assembled for ease of installation.
KIT CONTAINS:
Front
2x Dobinsons MRA Front Shocks - MRA45-A648
1x Pair Dobinsons Front Springs
2x Top Hats - TOP7
1x Pair Trundles Upper Control Arms - UCA4981N
2x Trundles Extended Front Sway Bar Links - NAV-033LH & NAV-033RH
Rear
2x Dobinsons MRA Rear Shocks - MRA43-A081B
2x Dobinsons Rear Leaf Springs
1x Dobinsons Leaf Bush Kit - PB45-1108K
2x Dobinsons U-Bolt Kits - UB59-453-3K
1x Trundles Adjustable Headlight Bracket - NAV-026
1x Set Trundles Rear Brake Hoses - EBH-NP300-R-R
Note: If you require fitting instructions for the MRA45-A648 shocks, please click me
Disclaimer: This product requires an LVV Certification to meet the current legal requirements for use on NZ public roads.
A wheel alignment must be performed after the installation of upgraded suspension parts. After a suspension lift, most ADAS (Advanced Driver Assistance Systems) equipped vehicles will require calibration.
It is the purchaser's responsibility to ensure the ADAS re-calibration is carried out by a specialised technician to guarantee the safety of the vehicle and its occupants.