Dobinsons Front Coil Springs to suit Toyota Hilux N70 4x4 2005-2015

Dobinsons Front Coil Springs to suit Toyota Hilux N70 4x4 2005-2015

Important notes regarding lift kit below kit contents, please read thoroughly before making your order

Includes:
1x Pair Dobinsons Front Coil Springs - Please select model type, lift amount and load rating from the dropdown menu.

Details:
- Linear/Variable Rate
- Raised Height

Note 1: The N70 Hilux sits nose down from factory, if you are chasing an even ride height you will need to either lift only the front of vehicle 50mm (2"), or lift the front 25mm (1") higher than the rear.

If you are wanting to avoid cert, either a 50mm front only or 50mm front & 25mm rear lift is advised - using the 25mm leaf springs (up to 280kg constant load) in the rear and 50mm springs in front will achieve this nicely. If you want full 50mm lift in rear, you will have to run 75mm (3") in front, please see note 2 for more info.

If you have a Single Cab or Petrol N70, we recommend that you lower the specifications of the coil spring by one part number for best result. If you are unsure on which options to select, please feel free to contact us here before purchasing.

Note 2: When running 75mm front, we strongly recommend you run an adjustable coil over. This allows you to dial in the ride height while also accommodating varying loads (future proofs your lift if you want to add a bullbar and/or winch in future), and gives you the ability to make any adjustments as necessary come certification time (to gain adequate droop travel etc.). You will also require Upper Control Arms and a Diff Drop at 75mm.