Enerdrive ePOWER 12V 2000W True Sine Wave Inverter with AC Transfer & Safety Switch

Usually Ships Within 24 Hours, Unless on Pre-Order

Enerdrive ePOWER 12V 2000W True Sine Wave Inverter with AC Transfer & Safety Switch

Please Note: All orders placed will take up to 5 business days to ship due to logistics.

1x Enerdrive ePOWER 12V 2000W True Sine Wave Inverter with AC Transfer & Safety Switch

The ePOWER 2000W Inverter with AC Transfer & Safety Switch is one in a family of affordable, high quality, professional level inverters by Enerdrive. By using the latest power conversion technology, ePOWER inverters deliver clean and energy efficient true sine wave AC power from your DC supply.

This ePOWER Inverter incorporates a 16A AC Transfer Switch which allows for seamless AC power transfer between Mains/Generator and Inverter. This helps to keep your appliances running with almost no break time on AC transfer and allows for a much simpler installation on-board.

Also included in the unit is a RCD Safety Switch. This switch monitors the flow of electricity through the inverter and detects any problems that may pose a risk to personal safety and switches the output power off within 0.03 of a second.

The ePOWER 2000W is built to operate basic equipment such as power tools, computers, microwave ovens, televisions and other appliances that use up to 2000W of power for operation. All Enerdrive ePOWER Inverters are covered by our extensive 3 Year warranty.

ePOWER Inverter Features:
- Seamless 16A AC Internal Transfer Switch
- AC RCD/Safety Switch with test button
- Removable LED Remote Control Display Panel
- Regulated Pure Sine Wave Output
- Silent Operation
- Compact Size for Easy Installation
- USB Port for charging USB devices

AC Output Power: 2000W
AC Output Current: 8.7A
AC Output Voltage: 230Vac / 50Hz
AC Output Waveform: Sinewave (<3% THD)
Nominal DC Input Voltage: 12.5 VDC
No Load Battery Draw: < 1.5 ADC
DC Input Voltage Operating Range 10.5 - 15.5 VDC
Under Voltage Alarm: 11.0 / 12.1 VDC
Under Voltage Alarm Recovery: 11.3 / 12.3 VDC
Under Voltage Shutdown: 10.5 / 11.8 VDC
Under Voltage Shutdown Recovery: 12.0 / 12.6 VDC
Over Voltage Shutdown: 15.5 VDC
USB Port: 5V, 750 mA
AC Transfer Switch
Transfer Time: <30ms
Transfer Relay Rating: 16A (resistive load)
AC Input socket IEC-C20: 16A max
AC Output socket IEC-C19: 16A max
AC Output Front GPO: 10A max
Conformance: All Required Australian Standards, CE LVD: EN/IEC 62040-1, IEC61558-2-16
EMI/EMC: CE EMC: EN/IEC 62040-2 category C1
Agency Markings: RCM, CE
Operating Temperature: 0°C to 40°C
Storage Temperature: -20°C to 60°C
Relative Humidity: 5-90% noncondensing
Operating Altitude: Up to 3000 meters above sea level
Dimensions (WxLxH): 435 x 230 x 115mm
Weight: 5.9Kg
Warranty: 5 Years

Note: Specifications subject to change without notice.

Important: Power Drain from DC Battery Bank.

Please note that there is a power drain of approx 700mA from the battery bank when the Inverter is running in AC By-Pass mode. In order to avoid draining down the battery bank, a battery charger with sufficient power is required to maintain the battery bank voltage.

Disclaimer: It is the purchaser’s responsibility to ensure all products and the installation thereof meet current LVV requirements, where applicable.

Shipping Information

Our on-line store is open 24/7 and we ship Monday through Friday, excluding some holidays. Orders received for products without shipping restrictions on its product page will ship the same business day when received before 3:00pm NZST. Orders in high demand will have an estimated production time listed on its product page and will ship according to the date listed.

About Us

Established over a decade ago, Trundles Automotive is proud to have grown to become an industry-leading manufacturer and supplier of 4x4 vehicle parts & accessories in New Zealand and Australia.


You may also like