Profender 2-4" Adjustable Lift Kit to suit Nissan Navara D23 NP300 2015-Onwards (Coil Rear)

Profender 2-4" Adjustable Lift Kit to suit Nissan Navara D23 NP300 2015-Onwards (Coil Rear)

We strongly recommend you run an adjustable coil over when opting for a 3" front lift. This allows you to dial in the ride height while also accommodating varying loads (future proofs your lift if you want to add a bullbar and/or winch in future), and gives you the ability to make any adjustments as necessary come certification time.

Note:
- A maximum of a 3" lift setting will be used when pre-assembling.
- A 4" Lift is achievable with extra components. A 4" Lift will most likely NOT pass a NZ certification as this will decrease the suspension droop travel, it is up to the customer to set these any higher than a 3" Lift.
- The NP300 sits nose down from factory, therefore if you are chasing an even look we recommend only raising the front 2". We also strongly recommend a height adjustable coil-over if budget allows to give you the ability to make adjustments.  

Kit Contains
Front:
Profender Adjustable Coil-Over Shocks - MG-56110A50
Dobinsons Front Springs
Trundles Strut Mounts - TOP7
Upper Control Arms - UCA4981N
Front Sway Bar Links - NAV-033-LH & RH

Front shocks come pre-assembled for ease of installation

Rear:
Profender Heavy Duty Shocks - PF-5009P
Dobinsons Rear Coil Springs
Rear Extended Sway Bar Links - NAV-031
Adjustable Pan Hard Rod - NAV-032
Adjustable Headlight Bracket - NAV-026
Rear Brake Hoses - EBH-NP300-R-R

Please use the drop down menu to select the correct spring rates depending on your vehicles accessories.

About Dobinsons Springs and Suspension

SKU: NISS-86MG