Selling fast!
Get yours while you can.
Your cart is empty :(
Continue shopping
4xJournal Vol.3
OUT NOW!
Your cart
Estimated total:
$0.00 NZD
NP300C40PAG-1
Couldn't load pickup availability
If this Kit is showing as "Pre-Order" please complete the product enquiry form on this page to confirm which items are out of stock. Sometimes, there is only one item that is out of stock which may be able to be substituted to complete the kit.
Disclaimer: It is the purchaser’s responsibility to ensure all products and the installation thereof meet current LVV requirements, where applicable.
Profender 40mm Lift Kit with Adjustable Damping to suit Nissan Navara D23 NP300 (Coil Rear) 2015-Onwards
NOTE:
- The NP300 sits nose down from factory, therefore if you are chasing an even look we recommend only raising the front 40mm, you can check out our Pre Assembled Strut kits here: 40mm Pre-Assembled Front Lift
- We also strongly recommend a height adjustable coil-over if budget allows to give you the ability to make adjustments.
- These shocks have 4-Stage Damping and are fixed height only.
Please use the drop down menu to select the correct spring rates depending on your engine type and vehicles accessories.
Type: Navara
Model: D23 NP300
Year: 2015 -
Suspension Type: Coil Spring Front / Coil Spring Rear
Front Lift: 35-40mm Lift
Rear Lift: 40mm Lift
Detail:
- 4x4 Single Cab / Dual Cab / Extra Cab Models
- Twin Tube Adjustable Damping Shock Absorbers
- Front shocks come pre-assembled for ease of installation.
Front
2x Profender 4-Stage Damping Front Shocks - PAG-5611OA50
1x Pair Dobinsons Front Springs
2x Trundles Strut Mounts - TOP7
Rear
2x Profender 4-Stage Damping Rear Shocks - PAG-5009P
1x Pair Dobinsons Rear Coil Springs
40-75mm (2-3") Lifts with 410-415mm Extended Length shocks will give up to 600mm Hub-To-Guard height and will clear the strut tower without issues in most cases.
We recommend installing Trundles Upper Control Arms for 40mm lifts and higher.
| Make | Model | Years |
|---|---|---|
| NISSAN | Navara D23 NP300 (Coil REAR) | 2014–Onwards |
We're happy to help.

Selling fast!
Get yours while you can.
Trundles and this website are not affiliated with, endorsed by, or associated with Toyota. All trademarks, service marks, and logos used on this website are the property of their respective owners. The mention of Toyota on this website is solely for informational purposes and does not imply any partnership, sponsorship, or affiliation.
Profender 40mm Lift Kit with Adjustable Damping to suit Nissan Navara D23 NP300 (Coil Rear) 2015-Onwards
NOTE:
- The NP300 sits nose down from factory, therefore if you are chasing an even look we recommend only raising the front 40mm, you can check out our Pre Assembled Strut kits here: 40mm Pre-Assembled Front Lift
- We also strongly recommend a height adjustable coil-over if budget allows to give you the ability to make adjustments.
- These shocks have 4-Stage Damping and are fixed height only.
Please use the drop down menu to select the correct spring rates depending on your engine type and vehicles accessories.
Type: Navara
Model: D23 NP300
Year: 2015 -
Suspension Type: Coil Spring Front / Coil Spring Rear
Front Lift: 35-40mm Lift
Rear Lift: 40mm Lift
Detail:
- 4x4 Single Cab / Dual Cab / Extra Cab Models
- Twin Tube Adjustable Damping Shock Absorbers
- Front shocks come pre-assembled for ease of installation.
Front
2x Profender 4-Stage Damping Front Shocks - PAG-5611OA50
1x Pair Dobinsons Front Springs
2x Trundles Strut Mounts - TOP7
Rear
2x Profender 4-Stage Damping Rear Shocks - PAG-5009P
1x Pair Dobinsons Rear Coil Springs
40-75mm (2-3") Lifts with 410-415mm Extended Length shocks will give up to 600mm Hub-To-Guard height and will clear the strut tower without issues in most cases.
We recommend installing Trundles Upper Control Arms for 40mm lifts and higher.