Profender 50mm Gas Lift Kit to suit Toyota Hilux Surf / 4Runner (KZN185) 1996-2003

Profender 50mm Gas Lift Kit to suit Toyota Hilux Surf / 4Runner (KZN185) 1996-2003

Note 1: This Lift kit is for the KZN185 Model ONLY.

Note 2: For even ride height, we advise using similar rated springs from front to back. (No Load Front & No Load Rear / Loaded Front & Loaded Rear)

Please use the drop down menu to select the correct spring rates depending on your vehicles accessories.

Type: Surf / 4Runner
Model: KZN185
Year: 1996 - 2003
Suspension Type: Coil Spring Front / Coil Spring Rear
Front Lift: 50mm Lift
Rear Lift: 50mm Lift
Detail:
- Twin Tube Shock Absorbers
- Front shocks come pre-assembled for ease of installation.

Front:
2x Profender Front Shocks - PF-6607A50 V3
1x Pair Dobinsons Front Springs
2x Trundles Front Strut Mounts - TOP9

Rear:
2x Profender Rear Shocks - PF-6007P
1x Pair Dobinsons Rear Springs
1x Rear Extended Brake Hose - EBH-SURF-R-R

Profender front shocks for IFS vehicles are supplied with spring seat spacers (collars). These collars fit beneath the spring seat and can be used to increase spring preload and vehicle ride height if additional lift is required in the future.
 
When you order a pre-assembled strut from us, you do not need to install these collars before fitting the strut. Your struts are assembled to your requested ride height and load rating using a correctly specified coil spring.
 
If you are ordering shocks only to use with an existing lifted coil spring, you also do not need to install the collars, provided your current springs are correctly specified.
 
Installing these collars will increase the ride height of your supplied strut. As a guide, the 10 mm collar will typically provide approximately 15 mm of additional vehicle lift, although actual lift will vary depending on vehicle weight, accessories, and spring rate.
 
The collars are supplied separately and are not required for standard installation.
 
New Zealand Compliance Notice: If these collars are fitted to alter the spring seat height and increase ride height, LVV certification will be required before the vehicle can be legally used on the road. Customers should consult an LVV certifier before installation.
 
Shocks installed without the spring seat spacers are generally treated as direct replacement suspension components and typically do not require LVV certification.