Selling fast!
Get yours while you can.
Your cart is empty :(
Continue shopping
4xJournal Vol.5
OUT NOW!
Your cart
Estimated total:
$0.00 NZD
PAG-5601P&PAG-5601P
Couldn't load pickup availability
Disclaimer: It is the purchaser’s responsibility to ensure all products and the installation thereof meet current LVV requirements, where applicable.
A wheel alignment must be performed after the installation of upgraded suspension parts. After a suspension lift or bull bar install, most ADAS (Advanced Driver Assistance Systems) equipped vehicles will require calibration.
It is the purchaser's responsibility to ensure the ADAS re-calibration is carried out by a specialised technician to guarantee the safety of the vehicle and its occupants.
Profender Front Shock Absorbers (Pair) with 4-Stage Damping to suit Toyota Landcruiser 79 Series 1999-Onwards
NOTE: These shocks have 4-Stage Adjustable Damping and are fixed height only. We recommend using an adjustable coil-over when opting for a lift over 50mm as this will allow you to dial in the ride height while also accommodating varying loads (future proofing your lift if you plan to install a bullbar/winch in the future) and gives you the ability to make any adjustments as necessary come certification time.
Includes:
2x Profender Front Shock Absorbers - PAG-5601P
Details:
- Twin tube design with a 40mm piston and a 20mm shaft that provides excellent performance, and is designed to give a more comfortable and improved ride.
- 4-Stage damper adjustability for fine tuning of the ride
- Low pressure Nitrogen Gas prevents cavitation of oil inside the shock when it heats up during use over rough roads; this allows the shocks to work more consistently.
- The piston has a Teflon coating allowing it to slide more smoothly and last longer.
- Highly polished Chrome shaft ensures long shaft life.
- The shock absorber velocity sensing valve can accurately control the required damping force for different conditions.
- High quality seals are designed to protect against oil leaks and perform very well even in dusty and dirty conditions.
- Sold Pair
Extended & Compressed Lengths:
- Extended Length: 510mm (Pin Base to Pin Base)
- Compressed Length: 315mm (Pin Base to Pin Base)
| Make | Model | Years |
|---|---|---|
| TOYOTA | Landcruiser 79 Series Dual Cab Facelift | 2023–Onwards |
| TOYOTA | Landcruiser 79 Series Single Cab Facelift | 2023–Onwards |
| TOYOTA | Landcruiser 79 Series Dual Cab DPF | 2016–2022 |
| TOYOTA | Landcruiser 79 Series Single Cab DPF | 2016–2022 |
| TOYOTA | Landcruiser 79 Series Dual Cab Pre-DPF | 2009–2016 |
| TOYOTA | Landcruiser 79 Series Single Cab Pre-DPF | 1999–2016 |
We're happy to help.

Selling fast!
Get yours while you can.
Trundles and this website are not affiliated with, endorsed by, or associated with Toyota. All trademarks, service marks, and logos used on this website are the property of their respective owners. The mention of Toyota on this website is solely for informational purposes and does not imply any partnership, sponsorship, or affiliation.
Profender Front Shock Absorbers (Pair) with 4-Stage Damping to suit Toyota Landcruiser 79 Series 1999-Onwards
NOTE: These shocks have 4-Stage Adjustable Damping and are fixed height only. We recommend using an adjustable coil-over when opting for a lift over 50mm as this will allow you to dial in the ride height while also accommodating varying loads (future proofing your lift if you plan to install a bullbar/winch in the future) and gives you the ability to make any adjustments as necessary come certification time.
Includes:
2x Profender Front Shock Absorbers - PAG-5601P
Details:
- Twin tube design with a 40mm piston and a 20mm shaft that provides excellent performance, and is designed to give a more comfortable and improved ride.
- 4-Stage damper adjustability for fine tuning of the ride
- Low pressure Nitrogen Gas prevents cavitation of oil inside the shock when it heats up during use over rough roads; this allows the shocks to work more consistently.
- The piston has a Teflon coating allowing it to slide more smoothly and last longer.
- Highly polished Chrome shaft ensures long shaft life.
- The shock absorber velocity sensing valve can accurately control the required damping force for different conditions.
- High quality seals are designed to protect against oil leaks and perform very well even in dusty and dirty conditions.
- Sold Pair
Extended & Compressed Lengths:
- Extended Length: 510mm (Pin Base to Pin Base)
- Compressed Length: 315mm (Pin Base to Pin Base)