Double click image to zoom in
Click image to open expanded view
Disclaimer: This product requires an LVV Certification to meet the current legal requirements for use on NZ public roads.
Profender Monotube Adjustable Coilover Front Struts to suit Nissan Navara D40/D23 NP300 2005-Onwards
Includes:
1x Monotube Adjustable Shock Absorber - MG-56110A50
Details:
- These shocks are suitable for 50-100mm Lift. They will come pre-set at approximately 75mm - any fine adjustments can be done by customer after test fitting
- These shocks are fully rebuildable and can be re-valved
- Fine adjustments can still be made by filling up or releasing Nitrogen in the shock body instead of the reservoir
- 1 Year Manufacturer Warranty
Measurements:
- Min. Pressure 80 PSI
- Max. Pressure 200 PSI
- Pressure Set From Factory 150 PSI
- 46mm Piston with Teflon
- 20mm Super Polished Shaft
- 53mm Outer Body
Disclaimer: It is the purchaser’s responsibility to ensure all products and the installation thereof meet current LVV requirements, where applicable.
A wheel alignment must be performed after the installation of upgraded suspension parts. After a suspension lift, most ADAS (Advanced Driver Assistance Systems) equipped vehicles will require calibration.
It is the purchaser's responsibility to ensure the ADAS re-calibration is carried out by a specialised technician to guarantee the safety of the vehicle and its occupants.
Trundles Automotive Ltd
10 Cory John Place
Bell Block, New Plymouth 4312
New Zealand
sales@trundlesautomotive.com
OPENING HOURS
Weekdays - 8.00am - 5.00pm
Saturday - Closed
Sunday - Closed
Public Holidays - Closed
Sign up to our Newsletter
© 2024, Trundles Automotive Powered by Shopify
Profender Monotube Adjustable Coilover Front Struts to suit Nissan Navara D40/D23 NP300 2005-Onwards
Includes:
1x Monotube Adjustable Shock Absorber - MG-56110A50
Details:
- These shocks are suitable for 50-100mm Lift. They will come pre-set at approximately 75mm - any fine adjustments can be done by customer after test fitting
- These shocks are fully rebuildable and can be re-valved
- Fine adjustments can still be made by filling up or releasing Nitrogen in the shock body instead of the reservoir
- 1 Year Manufacturer Warranty
Measurements:
- Min. Pressure 80 PSI
- Max. Pressure 200 PSI
- Pressure Set From Factory 150 PSI
- 46mm Piston with Teflon
- 20mm Super Polished Shaft
- 53mm Outer Body