Double click image to zoom in
Click image to open expanded view
Disclaimer: This product requires an LVV Certification to meet the current legal requirements for use on NZ public roads.
Profender Monotube Remote Reservoir Front Shock Absorber to suit Isuzu D-Max 2020-Onwards
Includes:
1x Profender MRA Front Shock Absorber - TSA4-9610A50
1x Remote Reservoir Bracket and Mounts
1x Set of Rubber Shock Bushes
Details:
- Profender Remote Reservoir Shock absorbers are made from steel and Aluminium. The shock absorbers come with an 8 stage compression adjuster (1-Soft/8-Hard).
- These shock absorbers have a longer stroke and are taller to suit a 50mm-100mm lift when combined with a taller Coil Spring.
- This is a direct replacement for the OEM Shock Absorbers and should not require any modification to install.
Extended & Compressed Lengths:
Measured from centre of eye to base of pin.
- Extended Length: 510mm
- Compressed Length: 360mm
Disclaimer: It is the purchaser’s responsibility to ensure all products and the installation thereof meet current LVV requirements, where applicable.
A wheel alignment must be performed after the installation of upgraded suspension parts. After a suspension lift, most ADAS (Advanced Driver Assistance Systems) equipped vehicles will require calibration.
It is the purchaser's responsibility to ensure the ADAS re-calibration is carried out by a specialised technician to guarantee the safety of the vehicle and its occupants.
Trundles Automotive Ltd
10 Cory John Place
Bell Block, New Plymouth 4312
New Zealand
sales@trundlesautomotive.com
OPENING HOURS
Weekdays - 8.00am - 5.00pm
Saturday - Closed
Sunday - Closed
Public Holidays - Closed
Sign up to our Newsletter
© 2024, Trundles Automotive Powered by Shopify
Profender Monotube Remote Reservoir Front Shock Absorber to suit Isuzu D-Max 2020-Onwards
Includes:
1x Profender MRA Front Shock Absorber - TSA4-9610A50
1x Remote Reservoir Bracket and Mounts
1x Set of Rubber Shock Bushes
Details:
- Profender Remote Reservoir Shock absorbers are made from steel and Aluminium. The shock absorbers come with an 8 stage compression adjuster (1-Soft/8-Hard).
- These shock absorbers have a longer stroke and are taller to suit a 50mm-100mm lift when combined with a taller Coil Spring.
- This is a direct replacement for the OEM Shock Absorbers and should not require any modification to install.
Extended & Compressed Lengths:
Measured from centre of eye to base of pin.
- Extended Length: 510mm
- Compressed Length: 360mm