Profender MRA Front Shocks (Pair) to suit Toyota Hilux K Series 2022-Onwards

Profender MRA 8-Stage Adjustable Front Shocks (Pair) to suit Toyota Hilux K Series 2022 - Onwards

NOTE: Anodising colours may vary between shocks due to available stock.

Includes:
2x Profender 8-Stage MRA Shocks - TSA4-6639A50
2x Remote Reservoir Bracket and Mounts
2x Set of Rubber Shock Bushes
4x Spring Seat Spacers - see below "Included Spring Seat Spacers" section for more details 
2x Removable Spring Seats

Details:
- Profender Remote Reservoir Shock absorbers are made from steel and Aluminium. The shock absorbers come with an 8 stage compression adjuster (1-Soft/8-Hard).
- These shock absorbers have a longer stroke and are taller to suit a lift when combined with a taller Coil Spring.
- This is a direct replacement for the OEM Shock Absorbers and should not require any modification to install.

Profender front shocks for IFS vehicles are supplied with spring seat spacers (collars). These collars fit beneath the spring seat and can be used to increase spring preload and vehicle ride height if additional lift is required in the future.
 
When you order a pre-assembled strut from us, you do not need to install these collars before fitting the strut. Your struts are assembled to your requested ride height and load rating using a correctly specified coil spring.
 
If you are ordering shocks only to use with an existing lifted coil spring, you also do not need to install the collars, provided your current springs are correctly specified.
 
Installing these collars will increase the ride height of your supplied strut. As a guide, the 10 mm collar will typically provide approximately 15 mm of additional vehicle lift, although actual lift will vary depending on vehicle weight, accessories, and spring rate.
 
The collars are supplied separately and are not required for standard installation.
 
New Zealand Compliance Notice: If these collars are fitted to alter the spring seat height and increase ride height, LVV certification will be required before the vehicle can be legally used on the road. Customers should consult an LVV certifier before installation.
 
Shocks installed without the spring seat spacers are generally treated as direct replacement suspension components and typically do not require LVV certification.