Double click image to zoom in
Click image to open expanded view
ON SPECIAL NOW!! $2831 RRP NOW ONLY $2500! INCLUDES FREE REAR EXTENDED SHACKLES! GET IN QUICK!
Note:
- A maximum of a 75mm lift setting will be used when pre-assembling
- A 100mm Lift is achievable with extra components. A 100mm Lift will most likely NOT pass a NZ certification as this will decrease the suspension droop travel, it is up to the customer to set these any higher than a 75mm Lift.
- Not Suitable for PX1/PX2 Rangers.
You must fit Sway Bar Links when lifting these vehicles which can be found here.
Please use the drop down menu to select the correct spring rates depending on your vehicles accessories.
Type: Ranger
Model: PX3
Year: Mid 06/2018 - 06/2022
Suspension Type: Coil Spring Front / Leaf Spring Rear
Front Lift: 10mm - 75mm Lift
Rear Lift: 25mm-50mm Lift
Detail:
- 4x4 Strut Mounted Front Bump Stop Models Only
- Push Button Start Models Only
- Also Suits 4x2 High-Rider
- Monotube Remote Reservoir Shock Absorbers
- Front struts come pre-assembled for ease of installation.
Front
1x Profender MRA Front Left Shock Absorber - TSA4-1611A50L
1x Profender MRA Front Right Shock Absorber - TSA4-1611A50R
1x Pair Dobinsons Springs
2x Trundles Strut Top Mounts - TOP8
Rear
1x Profender MRA Left Rear Shock Absorber - PHMA-4045PL
1x Profender MRA Right Rear Shock Absorber - PHMA-4045PR
1x Set of Trundles Extended Shackles
Disclaimer: This product requires an LVV Certification to meet the current legal requirements for use on NZ public roads.
A wheel alignment must be performed after the installation of upgraded suspension parts. After a suspension lift, most ADAS (Advanced Driver Assistance Systems) equipped vehicles will require calibration.
It is the purchaser's responsibility to ensure the ADAS re-calibration is carried out by a specialised technician to guarantee the safety of the vehicle and its occupants.
Trundles Automotive Ltd
10 Cory John Place
Bell Block, New Plymouth 4312
New Zealand
sales@trundlesautomotive.com
OPENING HOURS
Weekdays - 8.00am - 5.00pm
Saturday - Closed
Sunday - Closed
Public Holidays - Closed
Sign up to our Newsletter
© 2024, Trundles Automotive Powered by Shopify
ON SPECIAL NOW!! $2831 RRP NOW ONLY $2500! INCLUDES FREE REAR EXTENDED SHACKLES! GET IN QUICK!
Note:
- A maximum of a 75mm lift setting will be used when pre-assembling
- A 100mm Lift is achievable with extra components. A 100mm Lift will most likely NOT pass a NZ certification as this will decrease the suspension droop travel, it is up to the customer to set these any higher than a 75mm Lift.
- Not Suitable for PX1/PX2 Rangers.
You must fit Sway Bar Links when lifting these vehicles which can be found here.
Please use the drop down menu to select the correct spring rates depending on your vehicles accessories.
Type: Ranger
Model: PX3
Year: Mid 06/2018 - 06/2022
Suspension Type: Coil Spring Front / Leaf Spring Rear
Front Lift: 10mm - 75mm Lift
Rear Lift: 25mm-50mm Lift
Detail:
- 4x4 Strut Mounted Front Bump Stop Models Only
- Push Button Start Models Only
- Also Suits 4x2 High-Rider
- Monotube Remote Reservoir Shock Absorbers
- Front struts come pre-assembled for ease of installation.
Front
1x Profender MRA Front Left Shock Absorber - TSA4-1611A50L
1x Profender MRA Front Right Shock Absorber - TSA4-1611A50R
1x Pair Dobinsons Springs
2x Trundles Strut Top Mounts - TOP8
Rear
1x Profender MRA Left Rear Shock Absorber - PHMA-4045PL
1x Profender MRA Right Rear Shock Absorber - PHMA-4045PR
1x Set of Trundles Extended Shackles