Profender Pre-Assembled MG Front Lift to suit Toyota Fortuner KUN51 2005-2015

Name: 33065 | Profender Pre-Assembled MG Front Lift to suit Toyota Fortuner KUN51 2005-2015
Brand: KITHEADER
SKU: FORT-274MG
Price: 1250.0 NZD
Availability: InStock

FORT-274MG

Select your model type:

2.7L Petrol 4.0L Petrol 3.0L Diesel

Select your lift amount:

25mm Lift 50mm Lift 40mm Lift

Select your load rating:

No Load 50-100Kg 0-50Kg

Pre-Order

$1,250.00

$1,250.00 ~~$0.00~~

Tax included. Shipping calculated at checkout.

PRE-ORDER INFORMATION

If this Kit is showing as "Pre-Order" please complete the product enquiry form on this page to confirm which items are out of stock. Sometimes, there is only one item that is out of stock which may be able to be substituted to complete the kit.

Disclaimer: This product requires an LVV Certification to meet the current legal requirements for use on NZ public roads. A wheel alignment must be performed after the installation of upgraded suspension parts. It is the purchaser’s responsibility to ensure all products and the installation thereof meet current LVV requirements, where applicable.

Disclaimer: This product requires an LVV Certification to meet the current legal requirements for use on NZ public roads.

DETAILS
COMPONENTS
Included Spring Seat Spacers

DETAILS

Profender Pre-Assembled MG Front Lift to suit Toyota Fortuner KUN51 2005-2015

Looking for a quick and easy lift for your Fortuner? We have the answer!

Simply unbolt your factory struts and replace with these direct bolt-in front pre-assembled shocks.

Please use the drop down menu to select your model type, lift amount and the correct spring rates depending on your vehicles accessories.

Type: Fortuner
Model: KUN/TGN51
Year: 2005 - 06/2015
Suspension Type: Coil Spring Front / Coil Spring Rear
Front Lift: 25mm - 50mm Lift
Detail:
- Monotube Internal Reservoir Shock Absorbers
- These front struts are pre-assembled in our workshop and ready to go.

COMPONENTS

2x Profender Front MG Shock - MG-4680A50
1x Pair Dobinsons Front Springs
2x Trundles Strut Top Mounts - TOP2

Included Spring Seat Spacers

Profender front shocks for IFS vehicles are supplied with spring seat spacers (collars). These collars fit beneath the spring seat and can be used to increase spring preload and vehicle ride height if additional lift is required in the future.

When you order a pre-assembled strut from us, you do not need to install these collars before fitting the strut. Your struts are assembled to your requested ride height and load rating using a correctly specified coil spring.

If you are ordering shocks only to use with an existing lifted coil spring, you also do not need to install the collars, provided your current springs are correctly specified.

Installing these collars will increase the ride height of your supplied strut. As a guide, the 10 mm collar will typically provide approximately 15 mm of additional vehicle lift, although actual lift will vary depending on vehicle weight, accessories, and spring rate.

The collars are supplied separately and are not required for standard installation.

New Zealand Compliance Notice: If these collars are fitted to alter the spring seat height and increase ride height, LVV certification will be required before the vehicle can be legally used on the road. Customers should consult an LVV certifier before installation.

Shocks installed without the spring seat spacers are generally treated as direct replacement suspension components and typically do not require LVV certification.