Profender Pre-Assembled MRA Height Adjustable Front Lift to suit Ford Ranger PX1/2 2011-2018
Profender Pre-Assembled MRA Height Adjustable Front Lift to suit Ford Ranger PX1/2 2011-2018
Click image to open expanded view
Profender Pre-Assembled MRA Height Adjustable Front Lift to suit Ford Ranger PX1/2 2011-2018
Profender Pre-Assembled MRA Height Adjustable Front Lift to suit Ford Ranger PX1/2 2011-2018

Profender Pre-Assembled MRA Height Adjustable Front Lift to suit Ford Ranger PX1/2 2011-2018

Price
$1,500
Model Type:3.2L Engine 4x4 Models
Lift Amount:35mm Lift
Load Rating:50-90Kg (Comfort/Reduced Rate)
Usually Ships Within 24 Hours, Unless on Pre-Order

Note: If this Kit is showing as "Pre-Order" please contact us to confirm which items are out of stock. Sometimes, there is only one item that is out of stock which may be able to be substituted to complete the kit. Contact us here.

Profender Pre-Assembled MRA Height Adjustable Front Lift to suit Ford Ranger PX1/2 2011-2018

NOTE:
- A maximum of a 75mm lift setting will be used when pre-assembling, it is up to the customer to set these any higher than a 75mm Lift.
- Not Suitable for PX3 Models

Looking for a quick and easy lift for your Ranger? We have the answer!

Simply unbolt your factory struts and replace with these direct bolt-in front pre-assembled shocks.

Please use the drop down menu to select your model type, lift amount and the correct spring rates depending on your vehicles accessories.

Type: Ranger
Model: PX1/2
Year: 08/2011 - Mid 06/2018
Suspension Type: Coil Spring Front / Leaf Spring Rear
Front Lift: 35mm - 75mm Lift
Detail: 
- 4x4 Chassis Mounted Front Bump Stop Models Only
- Turn-Key Start Models Only
- Also Suits 4x2 High-Rider
- Monotube Remote Reservoir Shock Absorbers
- These front struts are pre-assembled in our workshop and ready to go.

KIT CONTAINS:

1x Profender Front Left MRA Shock - TSA4-1603A50L
1x Profender Front Right MRA Shock - TSA4-1603A50R
1x Pair Dobinsons Springs
2x Trundles Strut Top Mounts - TOP3

Disclaimer: This product requires an LVV Certification to meet the current legal requirements for use on NZ public roads.

A wheel alignment must be performed after the installation of upgraded suspension parts. After a suspension lift, most ADAS (Advanced Driver Assistance Systems) equipped vehicles will require calibration.

It is the purchaser's responsibility to ensure the ADAS re-calibration is carried out by a specialised technician to guarantee the safety of the vehicle and its occupants.

Vehicle Fitment
SKU
PX-428TSA

You may also like