Double click image to zoom in
Click image to open expanded view
Trundles Heavy Duty Green Tow Point (Pair) to suit Mitsubishi Triton ML/MN 2006-2015
Important notes can be found in the IMPORTANT tab! Please read thoroughly before making your order.
A must have for anyone considering any type of off road or remote touring. The factory tow points are no better than a tie down point for transport. These Recovery points will allow you to use a Bridle strap to ensure an even tow.
- Made from 10mm Plate Steel
- Using SS41 carbon steel plate (Q235)
- Direct bolt on to your chassis
- No cutting or welding required
- Sold as a pair
- Option of using a Bridle strap
- Powdercoated Green for High visibility
- Destruction tested to over 100.4kN (10.23 ton force) EACH
- Each component will be rated to a WLL (Working Load Limit) of 3250kgs
- Only to be used with a shackle rated to maximum 3.25t.
1x Pair of Trundles Heavy Duty Tow Points - RP-TRI02
Fits the following Bullbars:
ARB, Opposite Lock, XROX, Factory Bumper, Factory Nudge Bar
Does not fit:
Genuine Bullbar, MCC, Ironman, TJM
- Opposite Lock: The centre bar bash plate will require trimming to fit around the points.
- Factory bumper: Will encounter issues with the strap hitting the bumper during recovery.
- Factory nudge bar: Fitment can occur if able to cut and modify the nudge bar bracket.
Disclaimer: It is the purchaser’s responsibility to ensure all products and the installation thereof meet current LVV requirements, where applicable.
Trundles Automotive Ltd
10 Cory John Place
Bell Block, New Plymouth 4312
New Zealand
sales@trundlesautomotive.com
OPENING HOURS
Weekdays - 8.00am - 5.00pm
Saturday - Closed
Sunday - Closed
Public Holidays - Closed
Sign up to our Newsletter
© 2024, Trundles Automotive Powered by Shopify
Trundles Heavy Duty Green Tow Point (Pair) to suit Mitsubishi Triton ML/MN 2006-2015
Important notes can be found in the IMPORTANT tab! Please read thoroughly before making your order.
A must have for anyone considering any type of off road or remote touring. The factory tow points are no better than a tie down point for transport. These Recovery points will allow you to use a Bridle strap to ensure an even tow.
- Made from 10mm Plate Steel
- Using SS41 carbon steel plate (Q235)
- Direct bolt on to your chassis
- No cutting or welding required
- Sold as a pair
- Option of using a Bridle strap
- Powdercoated Green for High visibility
- Destruction tested to over 100.4kN (10.23 ton force) EACH
- Each component will be rated to a WLL (Working Load Limit) of 3250kgs
- Only to be used with a shackle rated to maximum 3.25t.
1x Pair of Trundles Heavy Duty Tow Points - RP-TRI02
Fits the following Bullbars:
ARB, Opposite Lock, XROX, Factory Bumper, Factory Nudge Bar
Does not fit:
Genuine Bullbar, MCC, Ironman, TJM
- Opposite Lock: The centre bar bash plate will require trimming to fit around the points.
- Factory bumper: Will encounter issues with the strap hitting the bumper during recovery.
- Factory nudge bar: Fitment can occur if able to cut and modify the nudge bar bracket.