Skip to product information

Dobinsons Pre-Assembled MRA Front Lift to suit Nissan Navara D23 NP300 (Leaf Rear) 2014-Onwards

Dobinsons Pre-Assembled MRA Front Lift to suit Nissan Navara D23 NP300 (Leaf Rear) 2014-Onwards

NP300-440MRA

Pre-Order / Made To Order
Select your lift amount:
Select your load rating:
Regular price $1,899.00
Sale price $1,899.00 Regular price
Tax included.

PRE-ORDER INFORMATION

If this Kit is showing as "Pre-Order" please complete the product enquiry form on this page to confirm which items are out of stock. Sometimes, there is only one item that is out of stock which may be able to be substituted to complete the kit.

Disclaimer: This product requires an LVV Certification to meet the current legal requirements for use on NZ public roads.

A wheel alignment must be performed after the installation of upgraded suspension parts. After a suspension lift, most ADAS (Advanced Driver Assistance Systems) equipped vehicles will require calibration.

It is the purchaser's responsibility to ensure the ADAS re-calibration is carried out by a specialised technician to guarantee the safety of the vehicle and its occupants.

Disclaimer: This product requires an LVV Certification to meet the current legal requirements for use on NZ public roads.

DETAILS

Dobinsons Pre-Assembled MRA Front Lift to suit Nissan Navara D23 NP300 (Leaf Rear) 2014-Onwards

NOTE:
- The NP300 sits nose down from factory, therefore if you are chasing an even look we recommend only raising the front 40mm.
- You may also require Upper Control Arms and a Diff Drop at 75mm. A 100mm Lift is achievable with extra components. This will most likely NOT pass a NZ certification as this will decrease the suspension droop travel, and is up to the customer to set these any higher than a 75mm Lift.
- Series 5 May Require Notching Of The Lower Trailing Arm to Allow MRR To Fit

Suits Leaf Rear Models Only.

Looking for a quick and easy lift for your D23 Navara? We have the answer!

Simply unbolt your factory struts and replace with these direct bolt-in front pre-assembled shocks.

Please use the drop down menu to select your lift amount and the correct spring rates depending on your vehicles accessories.

Type: Navara
Model: D23 NP300
Year: 08/2014 -
Suspension Type: Coil Spring Front / Leaf Spring Rear
Front Lift: 10mm - 75mm Lift
Detail: 
- 4x4 Single Cab / Dual Cab / Extra Cab Models
- Monotube Remote Reservoir Shock Absorbers
- These front struts are pre-assembled in our workshop and ready to go.

COMPONENTS

2x Dobinsons MRA Shocks
1x Pair Dobinsons Springs
2x Trundles Strut Mounts - TOP7

EXTRAS

Note: If you require fitting instructions for the MRA45-A648 shocks, please click me

WHATS INCLUDED
Dobinsons MRA Adjustable Front Shock (Pair) to suit Nissan Navara D23 NP300 2014-Onwards Dobinsons MRA Adjustable Front Shock (Pair) to suit Nissan Navara D23 NP300 2014-Onwards
Dobinsons Front Coil Springs to suit Nissan Navara D23 NP300 4x4 (Leaf Rear) 2014-Onwards
Trundles Strut Top Mount to suit Nissan Navara D40 / D23 / Pathfinder R51 2005-Onwards Trundles Strut Top Mount to suit Nissan Navara D40 / D23 / Pathfinder R51 2005-Onwards

VARIANT OPTIONS & OPTIONAL EXTRAS
Trundles Upper Control Arms with Bushes to suit Nissan Navara D40/D23 NP300 2005-Onwards Trundles Upper Control Arms with Bushes to suit Nissan Navara D40/D23 NP300 2005-Onwards

Make Model Years
NISSAN Navara D23 NP300 (Leaf REAR) 2014–Onwards

Question about this product?

We're happy to help.