Profender 45mm MRA Lift Kit to suit Toyota Hilux K-Series 2022-Onwards

Profender 45mm MRA Lift Kit to suit Toyota Hilux K-Series 2022-Onwards

NOTE:
- FACTORY TOP SPACER MUST BE REUSED FOR PROPER FITMENT ON FRONT SHOCKS!

- Anodising colours may vary between shocks due to available stock. 

Please use the drop down menu to select the correct spring rates depending on your vehicles accessories.

Type: Hilux
Model: K-Series
Year: 2022 - 
Suspension Type: Coil Spring Front / Leaf Spring Rear
Front Lift: 45mm Lift
Rear Lift: 45-50mm Lift
Detail:
- Monotube Remote Reservoir Shock Absorbers
- Front shocks come pre-assembled for ease of installation.

Front:
2x Profender Front 8-Stage MRA Shocks - TSA4-6639A50
1x Pair Dobinsons Front Coil Springs
2x Trundles Strut Mounts - TOP2

Rear:
2x Profender Rear 8-Stage MRA Shocks - MRA4-6039P
2x Dobinsons Rear Leaf Springs
1x Dobinsons Leaf Bush Kit - PB59-1094K
2x Dobinsons U-Bolt Kits - UB59-440K

Dobinsons Rear Grease-able Shackles - SK59-064
Dobinsons Rear Grease-able Pins - SP59-060
Trundles Arm Style Diff Drop - DDHIL-ARM
Profender Upper Control Arms - UCAB01-06-0
Dobinsons Billet Upper Control Arms - UCA59-203K-KSERIES
Dobinsons Tail Shaft Spacer Kit (can reduce driveline vibration) - WA59-553K

Profender front shocks for IFS vehicles are supplied with spring seat spacers (collars). These collars fit beneath the spring seat and can be used to increase spring preload and vehicle ride height if additional lift is required in the future.
 
When you order a pre-assembled strut from us, you do not need to install these collars before fitting the strut. Your struts are assembled to your requested ride height and load rating using a correctly specified coil spring.
 
If you are ordering shocks only to use with an existing lifted coil spring, you also do not need to install the collars, provided your current springs are correctly specified.
 
Installing these collars will increase the ride height of your supplied strut. As a guide, the 10 mm collar will typically provide approximately 15 mm of additional vehicle lift, although actual lift will vary depending on vehicle weight, accessories, and spring rate.
 
The collars are supplied separately and are not required for standard installation.
 
New Zealand Compliance Notice: If these collars are fitted to alter the spring seat height and increase ride height, LVV certification will be required before the vehicle can be legally used on the road. Customers should consult an LVV certifier before installation.
 
Shocks installed without the spring seat spacers are generally treated as direct replacement suspension components and typically do not require LVV certification.