Profender Pre-Assembled MRA Height Adjustable Front Lift to suit Toyota Hilux K-Series 2022-Onwards

Name: Profender Pre-Assembled MRA Height Adjustable Front Lift to suit Toyota Hilux K-Series 2022-Onwards
Brand: KITHEADER
SKU: KSERIES-302TSA
Price: 1599.0 NZD
Availability: InStock

KSERIES-302TSA

Select your lift amount:

45mm Lift 75mm Lift

Select your load rating:

0-40Kg (Comfort Option) 60-90Kg

Select your upper control arms add-on:

No - Do Not Add Upper Control Arms Yes - Add Profender Upper Control Arms Yes - Add Dobinsons Upper Control Arms

In stock

$1,599.00

$1,599.00 ~~$0.00~~

Tax included. Shipping calculated at checkout.

PRE-ORDER INFORMATION

If this Kit is showing as "Pre-Order" please complete the product enquiry form on this page to confirm which items are out of stock. Sometimes, there is only one item that is out of stock which may be able to be substituted to complete the kit.

Disclaimer: This product requires an LVV Certification to meet the current legal requirements for use on NZ public roads.

A wheel alignment must be performed after the installation of upgraded suspension parts. After a suspension lift or bull bar install, most ADAS (Advanced Driver Assistance Systems) equipped vehicles will require calibration.

It is the purchaser's responsibility to ensure the ADAS re-calibration is carried out by a specialised technician to guarantee the safety of the vehicle and its occupants.

Disclaimer: This product requires an LVV Certification to meet the current legal requirements for use on NZ public roads.

DETAILS
COMPONENTS
EXTRAS
Included Spring Seat Spacers

DETAILS

Profender Pre-Assembled MRA Height Adjustable Front Lift to suit Toyota Hilux K-Series 2022-Onwards

NOTE:
- FACTORY TOP SPACER MUST BE REUSED FOR PROPER FITMENT!
- A 100mm Lift is achievable with extra components. A 100mm Lift will most likely NOT pass a NZ certification as this will decrease the suspension droop travel, it is up to the customer to set these any higher than a 75mm Lift.
- Anodising colours may vary between shocks due to available stock.

Looking for a quick and easy lift for your Hilux? We have the answer!

Simply unbolt your factory struts and replace with these direct bolt-in front pre-assembled shocks.

Please use the drop down menu to select your lift amount and the correct spring rates depending on your vehicles accessories.

Type: Hilux
Model: K-Series
Year: 2022 -
Suspension Type: Coil Spring Front / Leaf Spring Rear
Front Lift: 45mm - 75mm Lift
Detail:
- Monotube Remote Reservoir Shock Absorbers
- These front struts are pre-assembled in our workshop and ready to go.

COMPONENTS

2x Profender MRA Front Shocks - TSA4-6639A50
1x Pair Dobinsons Front Springs
2x Trundles Strut Mounts - TOP2

EXTRAS

Diff Drop (Arm Style) - DDHIL-ARM
Profender Upper Control Arms - UCAB01-06-0
Dobinsons Billet Upper Control Arms - UCA59-203K-KSERIES

Included Spring Seat Spacers

Profender front shocks for IFS vehicles are supplied with spring seat spacers (collars). These collars fit beneath the spring seat and can be used to increase spring preload and vehicle ride height if additional lift is required in the future.

When you order a pre-assembled strut from us, you do not need to install these collars before fitting the strut. Your struts are assembled to your requested ride height and load rating using a correctly specified coil spring.

If you are ordering shocks only to use with an existing lifted coil spring, you also do not need to install the collars, provided your current springs are correctly specified.

Installing these collars will increase the ride height of your supplied strut. As a guide, the 10 mm collar will typically provide approximately 15 mm of additional vehicle lift, although actual lift will vary depending on vehicle weight, accessories, and spring rate.

The collars are supplied separately and are not required for standard installation.

New Zealand Compliance Notice: If these collars are fitted to alter the spring seat height and increase ride height, LVV certification will be required before the vehicle can be legally used on the road. Customers should consult an LVV certifier before installation.

Shocks installed without the spring seat spacers are generally treated as direct replacement suspension components and typically do not require LVV certification.