Profender 75mm Gas Lift Kit with Adjustable Damping to suit Toyota Hilux Surf / 4Runner (KZN185) 1996-2003

SURF185-75-PAG-1

Pre-Order
$2,020.00
$2,020.00 $0.00
Tax included. Shipping calculated at checkout.

PRE-ORDER INFORMATION

If this Kit is showing as "Pre-Order" please complete the product enquiry form on this page to confirm which items are out of stock. Sometimes, there is only one item that is out of stock which may be able to be substituted to complete the kit.

Disclaimer: This product requires an LVV Certification to meet the current legal requirements for use on NZ public roads. A wheel alignment must be performed after the installation of upgraded suspension parts. It is the purchaser’s responsibility to ensure all products and the installation thereof meet current LVV requirements, where applicable.

Disclaimer: Please be aware only a no load spring option is available for 75mm (3") lifts.

DETAILS

Profender 75mm Gas Lift Kit with Adjustable Damping to suit Toyota Hilux Surf / 4Runner (KZN185) 1996-2003

Important notes regarding lift kits can be found in the IMPORTANT tab! Please read thoroughly before making your order.

This 75mm (3") kit is designed for no load applications only due to the suspension setup in this vehicle.

Please use the drop down menu to select the correct spring rates depending on your vehicles accessories.

Type: Surf / 4Runner
Model: KZN185
Year: 1996 - 2003
Suspension Type: Coil Spring Front / Coil Spring Rear
Front Lift: 75mm Lift
Rear Lift: 75mm Lift
Detail:
- Twin Tube Adjustable Damping Shock Absorbers
- Front shocks come pre-assembled for ease of installation.

IMPORTANT!
KZN185 75mm springs are only suitable for a NO LOAD application. If you have front accessories, you will need to purchase a kit using a height adjustable shock to accommodate your accessory weight. This is the only way to accommodate front load at 3". Any of the following kits will be suitable: IMS & MRA Full Lift Kits
If you have rear load that you need to accommodate, you will need to consider opting for the 50mm kit, as this height offers rating options to suit.   We strongly recommend you run an adjustable coil over when opting for a 75mm (3") front lift. This allows you to dial in the ride height while also accommodating varying loads (future proofs your lift if you want to add a bullbar and/or winch in future), and gives you the ability to make any adjustments as necessary come certification time.

Due to the limitations of this vehicles suspension when lifted to 75mm (3") the ride comfort will be affected. The vehicle will be much firmer than on factory suspension and if this is an issue we recommend sticking to a 50mm (2") lift. Please get in touch if you would like to discuss this further.

If you have reduced droop travel on fitment or have a 75mm (3") lift, we recommend adding a 10mm spacer to the shocks.

75mm (3") lifts should run to 475mm Extended length on the shocks.

COMPONENTS

Front:
2x Profender 4-Stage Damping Front Shocks - PAG-6607A50
1x Pair Dobinsons Front Springs - C59-300
2x Trundles Front Strut Mounts - TOP9
1x Trundles Diff Drop - DD-SURF185-KIT

Rear:
2x Profender 4-Stage Damping Rear Shocks - PAG-6007P
1x Pair Dobinsons Rear Springs - C59-125
1x Trundles Extended Rear Brake Hose - EBH-SURF-R-R

Included Spring Seat Spacers

Profender front shocks for IFS vehicles are supplied with spring seat spacers (collars). These collars fit beneath the spring seat and can be used to increase spring preload and vehicle ride height if additional lift is required in the future.
 
When you order a pre-assembled strut from us, you do not need to install these collars before fitting the strut. Your struts are assembled to your requested ride height and load rating using a correctly specified coil spring.
 
If you are ordering shocks only to use with an existing lifted coil spring, you also do not need to install the collars, provided your current springs are correctly specified.
 
Installing these collars will increase the ride height of your supplied strut. As a guide, the 10 mm collar will typically provide approximately 15 mm of additional vehicle lift, although actual lift will vary depending on vehicle weight, accessories, and spring rate.
 
The collars are supplied separately and are not required for standard installation.
 
New Zealand Compliance Notice: If these collars are fitted to alter the spring seat height and increase ride height, LVV certification will be required before the vehicle can be legally used on the road. Customers should consult an LVV certifier before installation.
 
Shocks installed without the spring seat spacers are generally treated as direct replacement suspension components and typically do not require LVV certification.

WHAT'S INCLUDED
Profender Front Shock Absorbers (Pair) with 4-Stage Damping to suit Toyota Hilux Surf / 4Runner 185 Series 1996-2003
Profender Front Shock Absorbers (Pair) with 4-Stage Damping
14711 | Dobinsons Front Coil Springs to suit Toyota Hilux Surf / 4Runner 185 Series 1996-2003
14711 | Dobinsons Front Coil Springs
Trundles Strut Top Mount to suit Toyota Landcruiser Prado/Surf 1996-2003
Trundles Strut Top Mount
Trundles Diff Drop Kit to suit Toyota Hilux Surf / 4Runner (KZN185) 1996-2003
Trundles Diff Drop Kit
Profender Rear Shock Absorbers (Pair) with 4-Stage Damping to suit Toyota Hilux Surf / 4Runner 185 Series 1996-2003
Profender Rear Shock Absorbers (Pair) with 4-Stage Damping
20469 | Dobinsons Rear Coil Springs to suit Toyota Hilux Surf / 4Runner 185 Series 1996-2003
20469 | Dobinsons Rear Coil Springs
Trundles Rear Extended Brake Hose to suit Toyota Hilux Surf 130 Series/KZN185 1989-2003
Trundles Rear Extended Brake Hose
Make Model Years
TOYOTA Hilux Surf / 4Runner 3rd Gen (KZN / RZN / VZN185) 1996–2003

Question about this product?

We're happy to help.