Dobinsons 75mm MRA Lift Kit to suit Nissan Navara D23 NP300 2014-Onwards (Leaf Rear)

Dobinsons 75mm MRA Lift Kit to suit Nissan Navara D23 NP300 2014-Onwards (Leaf Rear)

Note:
- A 100mm Lift is achievable with extra components. A 100mm Lift will most likely NOT pass a NZ certification as this will decrease the suspension droop travel, it is up to the customer to set these any higher than a 75mm Lift.
-The NP300 sits nose down from factory, therefore if you are chasing an even look we recommend only raising the front 40mm. 
- Series 5 May Require Notching Of The Lower Trailing Arm to Allow MRR To Fit
- Suits Leaf Rear Models Only.

Please use the drop down menu to select your radius arm options and the correct spring rates depending on your vehicles accessories.

Type: Navara
Model: D23 NP300 
Year: 2014 -
Suspension Type: Coil Spring Front / Leaf Spring Rear
Front Lift: 75mm Lift
Rear Lift: 45mm Lift
Detail:
- 4x4 Single Cab / Dual Cab / Extra Cab Models
- Monotube Remote Reservoir Shock Absorbers
- Front shocks come pre-assembled for ease of installation.

Front
2x Dobinsons MRA Front Shocks - MRA45-A648
1x Pair Dobinsons Front Springs
2x Top Hats - TOP7
1x Pair Trundles Upper Control Arms - UCA4981NV2
2x Trundles Extended Front Sway Bar Links - NAV-033LH & NAV-033RH

Rear
2x Dobinsons MRA Rear Shocks - MRA43-A081B
2x Dobinsons Rear Leaf Springs
1x Dobinsons Leaf Bush Kit - PB45-1108K
2x Dobinsons U-Bolt Kits - UB59-453-3K
1x Trundles Adjustable Headlight Bracket - NAV-026
1x Set Trundles Rear Brake Hoses - EBH-NP300-R-R

Note: If you require fitting instructions for the MRA45-A648 shocks, please click me

75-100mm (3-4") Lifts with 420-425mm Extended Length shocks will give up to 620mm Hub-To-Guard height but will require clearancing of the strut tower. 

These lifts will result in a higher CV angle and may require more alignment correction components and the potential of reduced ride comfort.