Profender 75mm MG Height Adjustable Lift Kit to suit Toyota Hilux N70 KUN26 2005-2015
- Price
- $4,070
Note: If this Kit is showing as "Pre-Order" please contact us to confirm which items are out of stock. Sometimes, there is only one item that is out of stock which may be able to be substituted to complete the kit. Contact us here.
- DETAILS
- IMPORTANT!
- COMPONENTS
- EXTRAS
Profender 75mm MG Height Adjustable Lift Kit to suit Toyota Hilux N70 KUN26 2005-2015
Suits KUN26 3.0L T/D Models Only.
Important notes regarding lift kits can be found in the IMPORTANT tab! Please read thoroughly before making your order.
Please use the drop down menu to select the correct spring rates depending on your vehicles accessories.
Type: Hilux
Model: N70
Year: 2005 - 2015
Suspension Type: Coil Spring Front / Coil Spring Rear
Front Lift: 75mm Lift
Rear Lift: 50mm - 75mm Lift
Detail:
- KUN26 3.0L T/D Models Only.
- Monotube Internal Reservoir Shock Absorbers
- Front shocks come pre-assembled for ease of installation.
If you have a Single Cab or Petrol N70, we recommend that you lower the specifications of the coil spring by one part number for best result. If you are unsure on which options to select, please feel free to contact us here before purchasing.
A maximum of 75mm lift setting will be used when pre-assembling. You will also require Upper Control Arms and a Diff Drop at 75mm. A 100mm Lift is achievable with extra components. This will most likely NOT pass a NZ certification as this will decrease the suspension droop travel, and is up to the customer to set these any higher than a 75mm Lift.
KIT CONTAINS:
Front
2x Profender MG Front Shocks - MG-4680A50
1x Pair Dobinsons Front Springs
2x Trundles Strut Mounts - TOP2
1x Trundles Upper Control Arm Set - UCA3881H-TOURV2
1x Trundles Arm Style Diff Drop Kit - DDHIL-ARM
1x Trundles Front Swaybar Relocation - HIL-039
Rear
2x Profender Gas Rear Shocks - PF-4046P
2x Dobinsons Rear Leaf Springs
1x Dobinsons Leaf Bush Kit - PB59-1094K
2x Dobinsons U-Bolt Kits
Dobinsons Rear Grease-able Shackles - SK59-053
Dobinsons Rear Grease-able Pins - SP59-060
Trundles Body Mount Weld-In Insert - OUTRIGGER-N70
Disclaimer: This product requires an LVV Certification to meet the current legal requirements for use on NZ public roads.
A wheel alignment must be performed after the installation of upgraded suspension parts. After a suspension lift, most ADAS (Advanced Driver Assistance Systems) equipped vehicles will require calibration.
It is the purchaser's responsibility to ensure the ADAS re-calibration is carried out by a specialised technician to guarantee the safety of the vehicle and its occupants.