Double click image to zoom in
Click image to open expanded view
Trundles Heavy Duty Green Tow Point (Pair) to suit Ford Ranger PX1/2/3 & Mazda BT-50 Series II 2011-2022
A must have for anyone considering any type of off road or remote touring. The factory tow points are no better than a tie down point for transport. These Recovery points will allow you to use a Bridle strap to ensure an even tow.
NOTE: Vehicles manufactured post 06/2018 have a stiffening rib in the front section of the chassis rail which affects fitment. Please refer to the fitting guide for modification of fitment.
Includes:
1x Heavy Duty Tow Point Kit - RP-RAN02
Features:
- Made from 10mm Plate Steel
- Using SS41 carbon steel plate (Q235)
- Direct bolt on to your chassis
- No cutting or welding required
- Sold as a pair
- Option of using a Bridle strap
- Powdercoated Green for High visibility
- Destruction tested to over 100.4kN (10.23 ton force) EACH
- Each component will be rated to a WLL (Working Load Limit) of 3250kgs
- Only to be used with a shackle rated to maximum 3.25t.
Fits the following Bullbars:
ARB, ARB Summit Bar, ECB, Opposite Lock, Ironman, XROX, MCC, Genuine Bullbar, Factory Bumper, Factory Nudge Bar, Shoreline, Others
FITTING ISSUES
- Factory bumper: modify lower plastic bumper for point to clear.
- MCC: RP-RAN02 can fit with modification, requires hole drilled to accept mounting bolt on passenger side (will be included in V2) Trimming of bar side plates required, when tow point fitted there will be no strength lost at this mount. You can completely remove the driver side mount - these are included in the bar manufacture for LHD vehicles.
- Ironman: RP-RAN02 can fit with modification, requires hole drilled to accept mounting bolt on passenger side (will be included in V2) Trimming of bar side plates required, when tow point fitted there will be no strength lost at this mount. You can completely remove the driver side mount - these are included in the bar manufacture for LHD vehicles.
- Other bars: TUFF BAR - YES - No modifications required 2016 model SMART BAR - YES 2018 current model - not modifications required
- Bash plate needs to be removed for install to approach chassis holes from the inside for the N.O.W. There will be a large rectangular hole opposite the middle tow point bolt that will provide access.
Fitting Instructions can be found HERE
Disclaimer: It is the purchaser’s responsibility to ensure all products and the installation thereof meet current LVV requirements, where applicable.
Trundles Automotive Ltd
10 Cory John Place
Bell Block, New Plymouth 4312
New Zealand
sales@trundlesautomotive.com
OPENING HOURS
Weekdays - 8.00am - 5.00pm
Saturday - Closed
Sunday - Closed
Public Holidays - Closed
Sign up to our Newsletter
© 2024, Trundles Automotive Powered by Shopify