Dobinsons Basic Gas Lift Kit to suit Toyota Hilux N70 2005-2015

Dobinsons Basic Gas Lift Kit to suit Toyota Hilux N70 2005-2015

Important notes regarding lift kits can be found in the IMPORTANT tab! Please read thoroughly before making your order. 

Please use the drop down menu to select the correct spring rates depending on your vehicles accessories.

Type: Hilux
Model: N70
Year: 2005 - 2015
Suspension Type: Coil Spring Front / Leaf Spring Rear
Front Lift: 50mm - 75mm Lift
Rear Lift: 25mm - 50mm Lift
Detail:
- Twin Tube Nitrogen Gas Charged Shock Absorbers
- Front shocks come pre-assembled for ease of installation.

The N70 Hilux sits nose down from factory, if you are chasing an even ride height you will need to either lift only the front of vehicle 50mm (2"), or lift the front 25mm (1") higher than the rear.

If you are wanting to avoid cert, either a 50mm front only or 50mm front & 25mm rear lift is advised - using the 25mm leaf springs (up to 280kg constant load) in the rear and 50mm springs in front will achieve this nicely. If you want full 50mm lift in rear, you will have to run 75mm (3") in front, please see below for more info.

If you have a Single Cab or Petrol N70, we recommend that you lower the specifications of the coil spring by one part number for best result. If you are unsure on which options to select, please feel free to contact us here before purchasing.

When running 75mm front, we strongly recommend you run an adjustable coil over. This allows you to dial in the ride height while also accommodating varying loads (future proofs your lift if you want to add a bull bar and/or winch in future), and gives you the ability to make any adjustments as necessary come certification time (to gain adequate droop travel etc.). You will also require Upper Control Arms and a Diff Drop at 75mm.

Front:
2x Dobinsons Heavy Duty Gas Shocks - GS59-220
1x Pair Dobinsons Springs
2x Trundles Strut Mounts - TOP2

Rear:
1x Pair Trundles Extended Shackles

Extended Ball Joints - HIL-001
Dobinsons Rear Greasable Pins - SP59-060
Trundles Spacer Diff Drop - HIL-005
or
Trundles Arm Style Diff Drop - DDHIL-ARM

For a lower replacement bush to fit GS59-220, please click here