Profender Basic Lift Kit with Adjustable Damping to suit Toyota Hilux N70 2005-2015
- Price
- $1,200
Note: If this Kit is showing as "Pre-Order" please contact us to confirm which items are out of stock. Sometimes, there is only one item that is out of stock which may be able to be substituted to complete the kit. Contact us here.
- DETAILS
- IMPORTANT!
- COMPONENTS
- EXTRAS
Profender Basic Lift Kit with Adjustable Damping to suit Toyota Hilux N70 2005-2015
Important notes regarding lift kits can be found in the IMPORTANT tab! Please read thoroughly before making your order.
Please use the drop down menu to select the correct spring rates depending on your vehicles accessories.
Type: Hilux
Model: N70
Year: 2005 - 2015
Suspension Type: Coil Spring Front / Leaf Spring Rear
Front Lift: 50mm - 75mm Lift
Rear Lift: 25mm - 50mm Lift
Detail:
- Twin Tube Adjustable Damping Shock Absorbers
- Front shocks come pre-assembled for ease of installation.
The N70 Hilux sits nose down from factory, if you are chasing an even ride height you will need to either lift only the front of vehicle 50mm (2"), or lift the front 25mm (1") higher than the rear.
If you are wanting to avoid cert, either a 50mm front only or 50mm front & 25mm rear lift is advised - using the 25mm leaf springs (up to 280kg constant load) in the rear and 50mm springs in front will achieve this nicely. If you want full 50mm lift in rear, you will have to run 75mm (3") in front, please see below for more info.
If you have a Single Cab or Petrol N70, we recommend that you lower the specifications of the coil spring by one part number for best result. If you are unsure on which options to select, please feel free to contact us here before purchasing.
These shocks have 4-Stage Adjustable Damping and are fixed height only. When running 75mm front, we strongly recommend you run an adjustable coil over. This allows you to dial in the ride height while also accommodating varying loads (future proofs your lift if you want to add a bull bar and/or winch in future), and gives you the ability to make any adjustments as necessary come certification time (to gain adequate droop travel etc.). You will also require Upper Control Arms and a Diff Drop at 75mm.
KIT CONTAINS:
Front:
2x Profender 4-Stage Damping Front Shocks - PAG-4680A50
1x Pair Dobinsons Springs
2x Trundles Strut Mounts - TOP2
Rear:
1x Pair Trundles Extended Shackles
Disclaimer: It is the purchaser’s responsibility to ensure all products and the installation thereof meet current LVV requirements, where applicable.
A wheel alignment must be performed after the installation of upgraded suspension parts. After a suspension lift, most ADAS (Advanced Driver Assistance Systems) equipped vehicles will require calibration.
It is the purchaser's responsibility to ensure the ADAS re-calibration is carried out by a specialised technician to guarantee the safety of the vehicle and its occupants.